Rest Mode on the PS5 is designed to save power while keeping your console in a low-power state, allowing you to quickly resume your session. However, this convenient feature can sometimes interfere with network services. When the console wakes, it must renegotiate its internet connection, authenticate with PlayStation Network, and restore online sessions. Failures in any of these steps can leave you unable to join online games, launch streaming apps, or even sign in.
The root cause often lies in how your router manages DHCP leases, the PS5’s power-saving networking settings, or temporary glitches in the system software. Fortunately, these issues are almost always fixable with a few targeted adjustments.
How to Fix PS5 Network Issues After Rest Mode
Restart Your Console and Network Equipment
A simple restart can clear temporary network states that cause problems. First, fully power off your PS5—do not just enter Rest Mode—by pressing the power button until you hear two beeps. Then unplug your router and modem for at least 30 seconds, plug them back in, and wait for the connection to stabilize. Start your PS5 and check if online games connect normally.
Disable the “Stay Connected to the Internet” Feature
The PS5 has a setting that keeps the internet connection active in Rest Mode, but it can sometimes cause instability when resuming. To adjust this, go to Settings > System > Power Saving > Features Available in Rest Mode. Turn off “Stay Connected to the Internet.” After a fresh restart, test your connection.
Set a Static IP Address and Use Google DNS
DHCP assignments can expire during Rest Mode, leading to conflicts when the console wakes. To prevent this, assign a static IP address on your PS5. Go to Settings > Network > Set Up Internet Connection, select your network, and choose Advanced Settings. Set IP Address Settings to Manual, enter an IP outside your router’s DHCP range (for example, 192.168.1.200), and input your subnet mask and gateway (usually 255.255.255.0 and 192.168.1.1). For DNS Settings, enter 8.8.8.8 and 8.8.4.4 (Google’s servers). Save and retest.
Adjust Router DHCP Lease Time
If a static IP isn’t feasible, log into your router’s admin panel and increase the DHCP lease time to 24 hours or more. This prevents the IP from expiring while the console is asleep. Look for DHCP settings under LAN or Network settings.
Rebuild the Database and Clear Cache
Corrupted system cache or database entries can affect network services. Boot your PS5 into Safe Mode by turning it off, then pressing and holding the power button until you hear a second beep. Connect a controller via USB and press the PS button. Select “Clear Cache and Rebuild Database.” Choose “Clear System Software Cache” first, then “Rebuild Database.” This won’t delete your data but may reorganize files and fix connectivity bugs.
Disable Power Saving on the LAN Port (If Using Wired Connection)
For wired users, some routers and switches implement energy-saving features that temporarily disable the Ethernet port when the console is in Rest Mode. To prevent this, ensure your router’s “Green Ethernet” or “Energy Efficient Ethernet” is turned off. Additionally, on the PS5, go to Settings > Network > Set Up Internet Connection, select your wired connection, go to Advanced Settings, and set “Power Saving Mode” to “Off.”
Perform a Network Reset on the PS5
A full network reset can clear erroneous configurations. Navigate to Settings > Network > Settings > Set Up Internet Connection, select your network, press the Options button on the controller, and choose “Forget.” Then go to Settings > System > Reset Options > Restore Default Settings (this won’t delete games or saves, only system settings like network). After rebooting, reconnect to your network.
Update Router Firmware and PS5 System Software
Outdated firmware on either device can cause compatibility issues. Check for PS5 system updates in Settings > System > System Software > System Software Update and Settings. For your router, visit the manufacturer’s website or use the admin interface. Install any available updates and restart both devices.
Open Necessary Ports or Enable UPnP
Strict NAT types can restrict online play. Ensure your router’s UPnP (Universal Plug and Play) is enabled. If problems persist, manually forward ports used by PSN: TCP 80, 443, 1935, 3478-3480; UDP 3074, 3478-3479. Consult your router’s manual for port forwarding instructions.
Frequently Asked Questions
Why does my PS5 lose internet after coming out of rest mode?
The most common reasons are DHCP lease expiration, aggressive power-saving settings that disconnect the network adapter, or a bug in the system software. The console fails to re-establish the network session properly upon wake, resulting in a “No Internet” or PSN sign-in error.
Can Rest Mode damage my PS5?
No, Rest Mode is a standard feature designed by Sony and will not damage the hardware. However, frequent power outages while in Rest Mode can corrupt data, so it’s wise to fully shut down if you expect electrical instability.
Should I always turn off “Stay Connected to the Internet” in Rest Mode?
Not necessarily. If you rely on remote downloads or updates while the console is sleeping, you can keep it on. But if you regularly experience network issues upon waking, disabling it is a reliable fix. You can also try toggling it back on after a system update.
Does using a wired connection instead of Wi-Fi help?
Yes, a wired Ethernet connection is generally more stable and less prone to interference. However, the post-rest mode issue can still occur if the Ethernet port powers down. Disabling the LAN power saving setting and ensuring your router does not enable green Ethernet features usually resolves it.
Will rebuilding the database delete my games or saves?
No, rebuilding the database does not erase any user data, installed games, or saved progress. It only reorganizes the file system and can fix various software glitches, including network-related ones.
How do I know if my router’s DHCP lease time is too short?
If the lease time is very short (e.g., less than one hour), the IP address may expire while the console is in Rest Mode. When the PS5 wakes, it may not obtain the same IP or might experience a conflict. Setting a longer lease time or using a static IP eliminates this variable.
