Why is my Steel Nomad score so low with a 9070 XT?

November 21, 2026 5 answers
Asked by kartPitExitGuess

I'm trying to get a baseline before undervolting my 9070 XT. FurMark looks roughly normal, but Steel Nomad scores nearly half what I expected for a stock card.

I'm running it on Linux through Proton Experimental with a 9800X3D and three monitors. Where should I start looking?

Answers

P5whiffWindow

First make sure the comparison is actually like for like. Check that the other results are for the same Steel Nomad test, not Steel Nomad Light, and compare the score as well as the settings and operating system where available. A Windows result isn't necessarily a clean baseline for a Proton run.

Save the full result from a couple of runs before changing anything. That gives you something repeatable to compare against as you troubleshoot.

Reply to this answer
arcadeSpareQuarter

Watch GPU utilization, clock speed, power draw and temperature during the benchmark. If clocks or power are unusually low, check the power profile and whether the card is hitting a thermal limit. If utilization is low too, that points you toward a different bottleneck than a GPU working flat out.

Keep the card at stock settings for now. Undervolting makes sense after you know what the baseline is doing.

Reply to this answer
P2walkspeed_7V

Check your kernel, Mesa and Vulkan driver versions, and make sure the benchmark is using the 9070 XT rather than the processor's integrated graphics. Newer GPUs can depend on sufficiently recent Linux graphics support.

As a test, try another Proton version and compare the results. Change one thing at a time so you can tell whether it made a difference.

Reply to this answer
GBCspriteSifter

The three monitors are worth testing, but I wouldn't assume they're the cause. Disconnect the two secondary displays for a run, then compare with your normal setup. Also check that the gaming monitor is connected to the graphics card.

Reply to this answer
P3guardPoint_6Y

FurMark looking normal is useful, but it doesn't rule out a problem specific to a different workload or graphics API. Try another Vulkan benchmark or a game with a repeatable benchmark. If those are low too, check the card's PCIe link speed and lane width under load, along with its seating and power connections.

Reply to this answer

Add your answer

Answers are reviewed before publication.

Related Discussions