Why is my RX 9070 XT slower than my old 6800 XT?

November 12, 2026 4 answers
Asked by lootSortRx

I switched from a 6800 XT to a 9070 XT, but STALKER 2 is getting worse frame rates. MangoHud reports throttling even though temperatures look good.

I'm using CachyOS with a custom BMQ kernel, Mesa 26.1.1, a Ryzen 5800X3D, 32GB of RAM and an 850W PSU at 3440x1440. What should I check first?

Answers

DPS_44

Start with the throttling report rather than assuming Linux support is the problem. Watch GPU utilization, clock speed, board power, and both edge and hotspot temperatures during the same section of the game. A cool edge temperature alone doesn't rule out a hotspot or power limit.

Check the card's power connectors too. The 850W PSU rating by itself doesn't tell you whether the cables and connectors are seated properly or whether the card is reaching its expected power level.

scrimReceipt6:

It would also help to note exactly which throttling indicator MangoHud shows. That may narrow down whether the limit is thermal, power-related, or something else.

Reply to this answer
kartBrakeMiso

I'd try the standard CachyOS kernel as a comparison before changing a bunch of other things. The custom kernel is an extra variable, and a newer GPU depends on kernel, firmware and Mesa support working together.

Check that the installed kernel and firmware packages support the 9070 XT, and confirm the game is actually using the expected Mesa driver. A kernel swap alone won't prove which component is responsible, but it's a useful test.

Reply to this answer
_parryPermit

Make sure it's an apples-to-apples test. Check resolution, upscaling, frame generation, ray tracing, graphics preset and any frame cap on both cards. Also compare the same area and workload if possible.

Low GPU usage with one CPU thread working hard can point to a CPU or game limit. High GPU usage with low clocks or an active throttle flag points you back toward the card, its power settings or the driver.

Reply to this answer
healingReceipt

Try another demanding game or a GPU benchmark as a sanity check. If the 9070 XT only falls behind in STALKER 2, look at that game's settings and shader compilation before treating it as a system-wide problem. If it happens everywhere, the driver, kernel and power checks become more useful.

Reply to this answer

Add your answer

Answers are reviewed before publication.

Related Discussions