I want to replace the shell on my handheld, but I am worried about damaging cables when removing the screen. Where should I start, and what should I watch out for?
How do I swap a handheld shell without damaging the cables?
Answers
For an OLED Steam Deck, the bottom left corner is one suggested starting point for getting a pick under the screen. Starting at the top or bottom right may put cables at risk.
Warm the edges gradually with a hair dryer to loosen the adhesive, keeping it moving rather than concentrating heat in one spot. Work around the screen slowly and keep the pick shallow, just enough to separate the adhesive. The approach described used about 3 to 4 mm of the pick under the screen. Cable locations and the safest starting point may differ on other handhelds, so check a guide for your exact model first.
Reply to this answer
Check the replacement shell carefully before taking anything apart. LCD and OLED versions may not fit the same way, even if they look similar. Line up the pegs and brackets as you go, and do not assume a shell that needs trimming is the right one for your model.
Reply to this answer
Add your answer
Answers are reviewed before publication.
sideboardSifter:
If the parts do not line up, double-check the shell version before cutting anything. Modifying the plastic could make it harder to return.