Why does my AMD GPU use more power when the screen goes blank?

November 19, 2026 3 answers
Asked by P2mixup!Unscheduled

Can an AMDGPU driver issue make a GPU draw much more power when the display blanks? How can I check for it, and what can I do if it happens?

Answers

quickslot~WrongPocket

There is a report of this happening on Linux, with GPU power rising to around 200 watts when the display blanks. The behavior was also seen in live environments, so an installed system configuration was not necessarily the cause in that case. That does not mean every AMD GPU or blank screen power spike has the same cause.

To check your own system, compare the GPU power and load before and after the display blanks. You can read /sys/kernel/debug/dri/1/amdgpu_pm_info over SSH while the screen is blank. The number may be different on your system, especially if you have an integrated GPU or multiple GPUs. Reading it may require sudo.

shmupBomb_3K:

Check the reported power as well as GPU load. A load change alone does not tell you how much extra electricity the card is using.

Reply to this answer
GBCcursor+Pancetta

Try turning the monitor off with its power button instead of letting the display blank. That did not trigger the reported spike, though it may behave differently on another setup. Another reported workaround was using Windows 11 while idle, where the GPU entered a power saving state.

Reply to this answer
!QCFbuffer+Pumice

The bill depends on how much extra power is drawn and for how long. For example, an extra 200 watts sustained for 10 hours would use 2 kWh. Multiply the extra kWh by your electricity rate to estimate the cost.

Use the difference between the blank-screen draw and normal idle draw for that calculation, not just the total GPU reading.

Reply to this answer

Add your answer

Answers are reviewed before publication.

Related Discussions